Turbobike Web Site www.Turborick.com
Hi Rick,I came up with an idea,since my motor (gsxr 1100wp '93) is both water and oil cooled,I was thinking that I could remove the oil cooler from it's present location in front of the oil filter and reposition it to make room for the turbo. At the same time I can use the oil lines that go to the oil cooler for the turbo,(since there is pressure in those lines) I don't think the turbo will flood with oil because the return line from the turbo goes straight to the oil pan wich is located lower than the turbo,saving me time and headaches!Now If i'm going to keep the oil cooler,I have to get oil to it and back,not worying that it will flood, I will take oil from the oil gally under the ignition advancer, route it to the cooler,and return it ????? Where would be a good spot to return the oil from the cooler?Tell me what you think of this idea. I hope you understand what i'm trying to say... Thanks Rick! always a big help! if anyone else knows what to do,please send me your thoughts... _________________________________________________________ DO YOU YAHOO!? Get your free @yahoo.com address at http://mail.yahoo.com