Turbobike Web Site www.Turborick.com

RE: [turbobike] Aries pistons

Abraham Mara (AbeFM@dis.member.org)
Tue, 30 Nov 1999 17:26:04 -0800 

This is a multi-part message in MIME format.

------=_NextPart_000_0000_01BF3B57.FAFF6BA0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

     Anyone have anything to say about aries pistons?  I went to get a set
from Orient Express for my 77 KZ-1000, and they eventually told me they had
not rings for their pistons.  These new guys are a bit more, but have been
around a while - so I was hopeing they are allright.

    Not to get off topic, but I have a Turbo City draw through kit with a
plenum the size of my thumb, and it ussualy seemed reasonably snappy (good
throttle response) as long as the accel. pump was dumping half a tank of
gas everytime.  Though this might have been more in the mid-upper range of
the revs.

                -Abe.

------=_NextPart_000_0000_01BF3B57.FAFF6BA0
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
 Anyone have anything to say about = aries=20 pistons?  I went to get a set from Orient Express for my 77 = KZ-1000,=20 and they eventually told me they had not rings for their=20 pistons.  These new guys are a bit more, but have been = around a=20 while - so I was hopeing they are allright.
 
Not to get off topic, but I have a Turbo = City draw=20 through kit with a plenum the size of my thumb, and it ussualy = seemed=20 reasonably snappy (good throttle response) as long as the accel. = pump was=20 dumping half a tank of gas everytime.  Though this might have = been more=20 in the mid-upper range of the revs.
 
       &nbs= p;   =20 -Abe.
------=_NextPart_000_0000_01BF3B57.FAFF6BA0--