Turbobike Web Site www.Turborick.com
In a message dated 11/18/99 2:26:11 PM US Eastern Standard Time, bgoodwin@iquest.net writes: << Are your float bowl vent lines and slide lift vent lines pressurized? >> The float bowls are pressurized by using the same lines that pressurized them with the stock Ram Air.I dont understand what you mean by the slide lift vent lines. I am trying to make my system more efficient.I had 131Hp before I did the turbo and 9.5-1 compression 950cc kit.Now I have 160HP on 8psi of boost.I think that I should have seen more then a 29 HP gain from the turbo.Another thing I am going to do over the winter is redgree the cams they are currently set at 103.5/103.5 also going to add an air/fuel ratio gage.(Should have done that originally)