Turbobike Web Site www.Turborick.com

Re: [turbobike] STILL floods when I turn fuel pump on.

stuart graves (STUARTGSXR@bigpond.com)
Tue, 26 Oct 1999 15:12:05 +1100 

This is a multi-part message in MIME format.

------=_NextPart_000_003F_01BF1FC4.76DB5540
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I have now run a seperate fuel line to the tank as the return,but i'ts still
leaking out the air jets (front of bellmouth?)after 10 seconds at 1.5 psi.I
have taken all the floats out and cleaned and inspected the float jet
needles,and they all seem to look ok,maybe it is a float height
problem.Should the heights be set to standard ?,I hope thats all it is
because Ive been told the needles only come with the whole float
assembly,and they are $90.00 EACH!.Also my fuel pressure reg. wont go any
lower than 1.5 psi,so I can't even drop the pressure further.
             Thanks to all who have helped so far,Stuart.

------=_NextPart_000_003F_01BF1FC4.76DB5540
Content-Type: text/html;
	charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
I have now run a seperate fuel line to the tank as = the=20 return,but i'ts still leaking out the air jets (front of = bellmouth?)after 10=20 seconds at 1.5 psi.I have taken all the floats out and cleaned and = inspected the=20 float jet needles,and they all seem to look ok,maybe it is a float = height=20 problem.Should the heights be set to standard ?,I hope thats all it is = because=20 Ive been told the needles only come with the whole float assembly,and = they are=20 $90.00 EACH!.Also my fuel pressure reg. wont go any lower than 1.5 = psi,so I=20 can't even drop the pressure further.
          &nbs= p; =20 Thanks to all who have helped so far,Stuart.  =
------=_NextPart_000_003F_01BF1FC4.76DB5540--