Turbobike Web Site www.Turborick.com

Re: [turbobike] Hey fellas O2 sensor $70

Anders Brink (anders.brink@lynchburg.net)
Tue, 19 Oct 1999 21:08:05 -0400

Intellitronix O2-sensor and gauge from http://www.summitracing.com
is around $60.    /anders @ http://www.http2.com/nitrous

Jon Watts wrote:
> 
> If you're semi-serious you can get a cyberdyne gauge for (I think)
> less than $100.
> 
> http://force-efi.com/cyber.htm
> 
> Even better if you can solder, make your own for all of $20.
> 
> http://efi332.eng.ohio-state.edu/diy_efi/projects/O2_LED/O2_LED.html
> 
> I'd think that for anyone doing this kind of development a gauge that
> could be mounted for a few months would be more useful than a
> multimeter.
> 
> --- WCame23238@aol.com wrote:
> > Doug, Three things are necessary. #1 O2 sensor, one wire type if
> > mounted near
> > port, 3 wire type if more than 16 inches from port. #2 low cost
> > digital
> > multimeter, taped on handlebar. #3 some sort of chart to relate
> > voltage to
> > mixture.  Works while driving, and readings are up dated many times
> > a second.
> > I have article at home that I will scan and email. It works great,
> > shows when
> > you are hitting that flat spot and gives an idea what the best fix.
> > I have
> > installed on two of by bikes.  Bill
> >
> 
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com


-- 
        /anders
        http://www.geocities.com/~anders_brink/mc/bandit.html