Turbobike Web Site www.Turborick.com
Just make one from a stock M10 Stainless or alloy (anodised coloured type) bolt, or capscrew. You need a small lathe and a 2.5mm drill bit. Then you can have any length you want. ----- Original Message ----- From: Anders Brink <anders.brink@lynchburg.net> Cc: <turbobike@natvideo.com> Sent: Friday, September 24, 1999 5:25 AM Subject: Re: [turbobike] RB Racing CBX Twin Turbo Kit > Bob Buehler wrote: > > I would also like to know if anyone has a source > > for 10 mm by 1.5 thread bango bolts. > > M10x1.5 is a coarse (normal) metric bolt. You should be > able to find it at Auto Zone, Fisher etc etc... and at > your local hardware store. If not, check out: > > http://www.pacificfasteners.com/ > http://www.mettec.com/metric.asp > > /anders > http://www.geocities.com/~anders_brink/mc/bandit.html