Turbobike Web Site www.Turborick.com

Re: [turbobike] project bike number 1

Rick (gsxr1100@ptw.com)
Fri, 22 Jan 1999 21:55:34 -0800

>I have two questions for the group
>I'm looking for a very low volume source for 1.375 inch diameter mandrel
>bent T304 stainless tubing, .w/ 062 wall thickness (or close) located
>here in the USA.
>I'm also looking for source for a turbine and compressor map for the IHI
>and Garrett turbocharger listed above so I can make a decision on the
>turbo.
>
>Any comments are welcome...thanks



Let me know what radius bend you need 
<1.375> was that inside diameter

Try the Turbonetics web site they have some Garrett maps
http://www.turboneticsinc.com/

I have maps for the IHI rhb5 and the rhb6
I use a rhb6 on my 1100 and boost comes on about 5k
the rhb5 would be a good choice for the street.
I have used the rhb5 on 750's with good results

Turbo Rick
350HP Turbo GSXR1100 Street bike And Performance Bikes
Links Page, Chat Room and coming soon the on line parts store
Web Site  http://www.ptw.com/~gsxr1100/
EL Mirage Land speed Record holder 204.626 MPH
E-mail gsxr1100@ptw.com