Turbobike Web Site www.Turborick.com

Re: [turbobike] Spacer gasket question

Bryan (bgoodwin@iquest.net)
Tue, 16 Nov 1999 07:25:43 -0500

Yep. Although you ususally install a pair of cam sprockets. When you raise
the deck height by installing a spacer, you'll be advancing both cams. How
thick is your spacer? When you degree your cams you'll be able to dial out
a little overlap if you want, but stock settings will probably do just fine.

At 11:02 PM 11/15/99 -0800, RAW ANT wrote:
>when you install a spacer gasket is it necessary to install an adjustable
>cam sprocket on the inlet cam     RAW M.... F..... ANT  
FZR1000 turbo EFI
(aka The Money Pit)