Turbobike Web Site www.Turborick.com

Re: [turbobike] Hey fellas O2 sensor $70

Tue, 19 Oct 1999 10:05:05 EDT

The part # of the sensor that I am using is Bosch #11025. Sensors develop 
there own voltage. This is a single wire sensor and works good if installed 
near port, 12 to16 inches.  If the sensor is farther from the port, then it 
doesn't get hot enough to generate voltage. In that case a 3 wire sensor 
would work best. The 3 wire uses a 12 volt source to get heat.  Bill