Turbobike Web Site www.Turborick.com

Re: [turbobike] cam settings

Rick (gsxr1100@ptw.com)
Fri, 7 May 1999 14:06:28 -0700

Try  110 on both then after you have a baseline with that you can try 112
and 114 on the exhaust

Turbo Rick
350HP Turbo GSXR1100 Street bike
Web Site  http://www.ptw.com/~gsxr1100/
Southern California Timing Association 1998 Fastest Bike of the year
EL Mirage Land speed Record holder 204.626 MPH
E-mail gsxr1100@ptw.com

----- Original Message -----
From: <GSXRTurbo1@aol.com>
To: <turbobike@natvideo.com>
Sent: Friday, May 07, 1999 9:08 AM
Subject: [turbobike] cam settings


>   As mentioned in a previous e-mail, I have an '86 GSXR1100 Mr. Turbo draw
> through system with a Mikuni HSR42 carb. I am using the stock cams, and
was
> wondering what the best settings (cam centerline) would be for this
> application. Anyone have experience in this area? What would be an approx
RPM
> to leave the starting line at the dragstrip with no wheelie bar, and what
> would be the best technique for the same? Thank you in anticipation of
your
> answer(s) - Thomas Gafa
>